The table below defines the instances of test hardware available on the ubxlib test farm and how each one is currently configured. It is parsed and used by the functions in u_data.py to know what to do so please always ensure that it is a properly formatted Markdown format table. The columns of the table are:
- a unique instance ID: the first digit of the instance ID represents either a physical thing (a board connected via a COM port/debugger) or a distinct process (e.g. run Lint), the remaining digits represent variants, e.g. using different SDKs on a board; the second/third digit(s) of the instance ID must be used consistently (e.g. for NRF52840 variant 0 is always the nRF5 SDK, variant 1 is always the Zephyr SDK, etc.),
- the duration field should be the approximate expected duration of the instance in minutes, used when working out how to spread the test load,
- the MCU field must match a unique MCU name from one of the port/platform
/<platform>/mcu/<mcu>directories (e.g.esp32), - some platforms (e.g. Zephyr and Arduino) require a board-level definition as well as an MCU; this may be provided in the "board" column,
- the platform name must match one of the port/platform
/<platform>directories (e.g. port/platform/esp-idf),- however, if you want to run CodeChecker instead of building the firmware you should add
CodeChecker:prefix to the platform name (e.g.CodeChecker:STM32Cube)
- however, if you want to run CodeChecker instead of building the firmware you should add
- where a choice of compilation toolchains is available the toolchain name must match a sub-directory of port/platform
/<platform>/mcu/<mcu>, - the module column lists the peripherals under test:
- if a module name begins with
SARAorLARAit will be prefixed by the test automation code withU_CELL_MODULE_TYPE_and then assigned to a compilation flagU_CFG_TEST_CELL_MODULE_TYPEfor use during testing; - if a module name begins with
NINA,ANNAorODINit will be prefixed by the test automation code withU_SHORT_RANGE_MODULE_TYPE_and then assigned to a compilation flagU_CFG_TEST_SHORT_RANGE_MODULE_TYPEfor use during testing; note that for the case where the SHO on-board Wi-Fi/BLE client is employed no module name is given and instead the compilation flagU_CFG_BLE_MODULE_INTERNALis added in the #defines column, - otherwise the module will be assumed to be GNSS and will be prefixed by the test automation code with
U_GNSS_MODULE_TYPE_and then assigned to a compilation flagU_CFG_TEST_GNSS_MODULE_TYPEfor use during testing,
- if a module name begins with
- all APIs that exist on an instance will usually be tested, the "APIs available" column is used by the u_select.py automation script (see README.md) to select the instances that should be run where only a single API is affected by a change, e.g. if only the at_client is affected by a change then only those instances that have
at_clientin this column will be run; the name here must match one in the directory structure (e.g.mqtt_clientfor the common/mqtt_client API), - lastly, overrides to or additional compilation flags may be supplied in the final column.
| ID | Description | Duration (mins) | MCU | Board | Platform | Toolchain | Module(s) (separate with spaces) | APIs available (separate with spaces) | #define overrides (separate with spaces) |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Doxygen | 1 | |||||||
| 2 | AStyle style checker | 1 | |||||||
| 3 | Pylint | 2 | |||||||
| 4.1 | Static size check | 2 | |||||||
| 4.2 | Static size check, cell only | 2 | SARA_R5 | UBXLIB_FEATURES=cell | |||||
| 4.3 | Static size check, gnss only | 2 | M9 | UBXLIB_FEATURES=gnss | |||||
| 4.4 | Static size check, short range only | 2 | NINA_W15 | UBXLIB_FEATURES=short_range | |||||
| 5.1 | Check no floating point | 2 | |||||||
| 5.2 | Check build without logging | U_CFG_ENABLE_LOGGING=0 | |||||||
| 5.3 | Check public headers not in ubxlib.h | ||||||||
| 5.4 | Check malloc()/free() being called | ||||||||
| 6.1 | CodeChecker (Zephyr) | NRF5340 | nrf5340dk_nrf5340_cpuapp | CodeChecker:Zephyr | SARA_R5 M8 NINA_W15 | U_CFG_BLE_MODULE_INTERNAL U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_BLE_TEST_CFG_REMOTE_SPS_PERIPHERAL=2462ABB6EAC6p U_CFG_APP_SHORT_RANGE_ROLE=1 U_CFG_TEST_NET_STATUS_CELL U_CFG_TEST_NET_STATUS_SHORT_RANGE U_DEBUG_UTILS_DUMP_THREADS | |||
| 6.2 | CodeChecker (STM32Cube) | STM32F4 | CodeChecker:STM32Cube | SARA_R5 NINA_W15 M8 | U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=0x42 U_CFG_SARA_R5_M8_WORKAROUND U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_CFG_TEST_SECURITY_C2C_TE_SECRET=\x00\x01\x02\x03\x04\x05\x06\x07\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8 U_CFG_TEST_NET_STATUS_CELL U_CFG_TEST_NET_STATUS_SHORT_RANGE U_DEBUG_UTILS_DUMP_THREADS | ||||
| 7 | Build PIO examples | ||||||||
| 8 | Build as a Zephyr module | NRF5340 | nrf5340dk_nrf5340_cpuapp | ||||||
| 10.0 | ESP32-DevKitC | 10 | ESP32 | ESP-IDF | M10 | port ubx_protocol gnss spartn | U_CFG_APP_GNSS_I2C=0 U_CFG_TEST_PIN_GNSS_RESET_N=23 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_CFG_MUTEX_DEBUG U_DEBUG_UTILS_DUMP_THREADS | ||
| 10.2.0 | ESP32-DevKitC | 5 | ESP32 | esp-wrover-kit | platformio | espidf | M10 | port device network | U_CFG_APP_FILTER=port.example U_CFG_APP_GNSS_I2C=0 U_CFG_TEST_PIN_GNSS_RESET_N=23 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 |
| 10.2.1 | ESP32-DevKitC | 5 | ESP32 | esp-wrover-kit | platformio | espidf | M10 | port device network | UBXLIB_FEATURES=gnss U_CFG_APP_FILTER=port.example.gnssInfo U_CFG_APP_GNSS_I2C=0 U_CFG_TEST_PIN_GNSS_RESET_N=23 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 |
| 11.0 | ESP32-DevKitC | 5 | ESP32 | ESP-IDF | M9 | port at_client ubx_protocol gnss spartn | U_CFG_APP_GNSS_SPI=2 U_CFG_TEST_PIN_GNSS_RESET_N=25 U_CFG_MUTEX_DEBUG U_CFG_TEST_UART_B=1 U_CFG_TEST_PIN_UART_A_CTS=-1 U_CFG_TEST_PIN_UART_A_RTS=-1 U_CFG_TEST_PIN_UART_A_RXD=26 U_CFG_TEST_PIN_UART_B_TXD=27 U_CFG_TEST_PIN_UART_B_RXD=14 U_DEBUG_UTILS_DUMP_THREADS | ||
| 11.1 | ESP32-DevKitC | 5 | ESP32 | esp32:esp32:esp32doit-devkit-v1 | Arduino | ESP-IDF | M9 | port at_client ubx_protocol gnss spartn | U_CFG_APP_GNSS_SPI=2 U_CFG_TEST_PIN_GNSS_RESET_N=25 U_CFG_TEST_UART_B=1 U_CFG_TEST_PIN_UART_A_CTS=-1 U_CFG_TEST_PIN_UART_A_RTS=-1 U_CFG_TEST_PIN_UART_A_RXD=26 U_CFG_TEST_PIN_UART_B_TXD=27 U_CFG_TEST_PIN_UART_B_RXD=14 |
| 11.2 | ESP32-DevKitC | 5 | ESP32 | esp-wrover-kit | platformio | arduino | M9 | port device network | U_CFG_APP_FILTER=port.example U_CFG_APP_GNSS_SPI=2 U_CFG_TEST_PIN_GNSS_RESET_N=25 |
| 12.0 | ESP32-DevKitC + EVK, Cat M1 | 25 | ESP32 | ESP-IDF | SARA_R5 M8 NINA_W15 | port device network sock ble wifi cell short_range security mqtt_client http_client gnss location | U_CELL_TEST_MUX_ALWAYS U_CFG_TEST_CELL_PWR_DISABLE U_CELL_CFG_SARA_R5_00B U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=2 U_CFG_APP_PIN_SHORT_RANGE_CTS=22 U_CFG_APP_PIN_SHORT_RANGE_RTS=23 U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_SARA_R5_M8_WORKAROUND U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_APP_PIN_CELL_TXD=21 U_CFG_APP_PIN_CELL_RXD=19 U_CFG_APP_PIN_CELL_VINT=-1 U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_CFG_TEST_SECURITY_C2C_TE_SECRET=\x00\x01\x02\x03\x04\x05\x06\x07\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8 U_DEBUG_UTILS_DUMP_THREADS | ||
| 12.2.0 | ESP32-DevKitC + EVK, Cat M1 | 5 | ESP32 | esp-wrover-kit | platformio | espidf | SARA_R5 M8 NINA_W15 | port device network | U_CFG_APP_FILTER=port.example.gnssInfo U_CELL_CFG_SARA_R5_00B U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=2 U_CFG_APP_PIN_SHORT_RANGE_CTS=22 U_CFG_APP_PIN_SHORT_RANGE_RTS=23 U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_SARA_R5_M8_WORKAROUND U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_APP_PIN_CELL_TXD=21 U_CFG_APP_PIN_CELL_RXD=19 U_CFG_APP_PIN_CELL_VINT=-1 U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_CFG_TEST_SECURITY_C2C_TE_SECRET=\x00\x01\x02\x03\x04\x05\x06\x07\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8 |
| 12.2.1 | ESP32-DevKitC + EVK, Cat M1 | 5 | ESP32 | esp-wrover-kit | platformio | espidf | SARA_R5 | port device network | UBXLIB_FEATURES=cell U_CFG_APP_FILTER=cellInfo U_CELL_CFG_SARA_R5_00B U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_APP_PIN_SHORT_RANGE_CTS=22 U_CFG_APP_PIN_SHORT_RANGE_RTS=23 U_CFG_SARA_R5_M8_WORKAROUND U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_APP_PIN_CELL_TXD=21 U_CFG_APP_PIN_CELL_RXD=19 U_CFG_APP_PIN_CELL_VINT=-1 U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_CFG_TEST_SECURITY_C2C_TE_SECRET=\x00\x01\x02\x03\x04\x05\x06\x07\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8 |
| 12.2.2 | ESP32-DevKitC + EVK, Cat M1 | 5 | ESP32 | esp-wrover-kit | platformio | espidf | NINA_W15 | port device network | UBXLIB_FEATURES=short_range U_CFG_APP_FILTER=wifiStation U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=2 U_CFG_APP_PIN_SHORT_RANGE_CTS=22 U_CFG_APP_PIN_SHORT_RANGE_RTS=23 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_CFG_TEST_SECURITY_C2C_TE_SECRET=\x00\x01\x02\x03\x04\x05\x06\x07\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8 |
| 13.0.0 | Nordic DK board (NRF52840) + EVK, Cat M1 | 25 | NRF52840 | nRF5SDK | GCC | SARA_R5 M10 | port at_client cell sock network mqtt_client ubx_protocol gnss spartn | U_CFG_TEST_CELL_PWR_DISABLE U_CFG_TEST_MQTT_CLIENT_SN_DISABLE_CONNECTIVITY_TEST U_CELL_CFG_SARA_R5_00B U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_APP_GNSS_I2C=1 U_CFG_TEST_PIN_GNSS_RESET_N=29 U_CFG_TEST_UART_B=0 U_CFG_TEST_PIN_UART_A_CTS=-1 U_CFG_TEST_PIN_UART_A_RTS=-1 U_CFG_TEST_PIN_UART_B_TXD=44 U_CFG_TEST_PIN_UART_B_RXD=43 U_CFG_TEST_PIN_UART_A_RXD=45 U_CFG_TEST_SECURITY_C2C_TE_SECRET=\x00\x01\x02\x03\x04\x05\x06\x07\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8 U_DEBUG_UTILS_DUMP_THREADS | |
| 13.1 | Nordic DK board (NRF52840) + EVK | 10 | NRF52840 | nrf52840dk_nrf52840 | Zephyr | port at_client ubx_protocol spartn | U_CFG_TEST_UART_B=0 U_DEBUG_UTILS_DUMP_THREADS | ||
| 14 | STM32F4 Discovery (STM32F407) + EVK, Cat M1 | 25 | STM32F4 | STM32Cube | SARA_R422 M9 | port device network sock security cell mqtt_client http_client gnss location | CMSIS_V2 U_CFG_TEST_CELL_PWR_DISABLE U_LOCATION_TEST_DISABLE U_CFG_1V8_SIM_WORKAROUND HSE_VALUE=8000000U U_CFG_APP_GNSS_SPI=2 U_CFG_APP_PIN_GNSS_SPI_MOSI=0x1F U_CFG_APP_PIN_GNSS_SPI_MISO=0x1E U_CFG_APP_PIN_GNSS_SPI_CLK=0x1D U_CFG_APP_PIN_GNSS_SPI_SELECT=0x1C U_CFG_TEST_PIN_GNSS_RESET_N=0x40 U_CFG_TEST_PIN_C=0x3F U_CFG_APP_GNSS_UART=-1 U_CFG_APP_PIN_GNSS_ENABLE_POWER=-1 U_CFG_TEST_UART_A=-1 U_CFG_APP_PIN_C030_ENABLE_3V3=-1 U_CFG_APP_PIN_CELL_RESET=-1 U_CFG_APP_CELL_UART=3 U_CFG_APP_PIN_CELL_TXD=0x38 U_CFG_APP_PIN_CELL_RXD=0x39 U_CFG_APP_PIN_CELL_RTS=-1 U_CFG_APP_PIN_CELL_CTS=-1 U_DEBUG_UTILS_DUMP_THREADS | ||
| 15.0.0 | Nordic DK board (NRF52840) + EVK | 10 | NRF52840 | nRF5SDK | GCC | M9 | port gnss device | U_CFG_APP_GNSS_SPI=3 U_CFG_TEST_PIN_GNSS_RESET_N=37 U_CFG_MUTEX_DEBUG U_DEBUG_UTILS_DUMP_THREADS | |
| 15.1 | Nordic DK board (NRF52840) + EVK | 10 | NRF52840 | nrf52840dk_nrf52840 | Zephyr | M9 | port device network ble short_range gnss | U_CFG_TEST_UART_A=-1 U_CFG_APP_GNSS_SPI=3 U_CFG_APP_PIN_GNSS_SPI_SELECT=29 U_CFG_TEST_PIN_GNSS_RESET_N=37 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_DEBUG_UTILS_DUMP_THREADS | |
| 16 | STM32F4 Discovery (STM32F407) | 10 | STM32F4 | STM32Cube | M10 | port ubx_protocol gnss spartn | HSE_VALUE=8000000U U_PORT_TEST_DISABLE_I2C U_CFG_APP_GNSS_I2C=1 U_CFG_TEST_PIN_GNSS_RESET_N=0x40 U_CFG_APP_GNSS_UART=-1 U_CFG_APP_PIN_GNSS_ENABLE_POWER=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_CFG_APP_PIN_C030_ENABLE_3V3=-1 U_CFG_APP_PIN_CELL_RESET=-1 U_DEBUG_UTILS_DUMP_THREADS | ||
| 17.1.0 | Nordic NRF5340 DK board | 10 | NRF5340 | nrf5340dk_nrf5340_cpuapp | Zephyr | M9 | port device network ble short_range lib_common ubx_protocol gnss spartn | U_CFG_APP_GNSS_SPI=2 U_CFG_APP_PIN_GNSS_SPI_SELECT=46 U_CFG_TEST_PIN_GNSS_RESET_N=37 U_CFG_BLE_MODULE_INTERNAL U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_BLE_TEST_CFG_REMOTE_SPS_PERIPHERAL=2462ABB6EAC6p U_CFG_APP_SHORT_RANGE_ROLE=1 U_DEBUG_UTILS_DUMP_THREADS | |
| 17.1.1 | Nordic NRF5340 DK board | 5 | NRF5340 | nrf5340dk_nrf5340_cpuapp | Zephyr | M9 | port | U_CFG_APP_FILTER=port U_CFG_APP_GNSS_SPI=2 U_CFG_TEST_GNSS_SPI_SELECT_INDEX=1 U_CFG_APP_PIN_GNSS_SPI_SELECT=46 U_CFG_TEST_PIN_GNSS_RESET_N=37 U_DEBUG_UTILS_DUMP_THREADS | |
| 18 | NORA-B1 NRF5340 DK board + EVK, Cat M1 | 20 | NRF5340 | nrf5340dk_nrf5340_cpuapp | Zephyr | SARA_R5 M8 | port device network sock security cell lib_common mqtt_client http_client gnss location | U_CELL_TEST_MUX_ALWAYS U_CFG_TEST_CELL_PWR_DISABLE U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_TEST_CLOUD_LOCATE U_CFG_TEST_CELL_LOCATE U_CFG_SARA_R5_M8_WORKAROUND U_CFG_APP_PIN_CELL_DTR=37 U_CFG_APP_PIN_CELL_PWR_ON=36 U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_CFG_TEST_SECURITY_C2C_TE_SECRET=\x00\x01\x02\x03\x04\x05\x06\x07\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8 U_DEBUG_UTILS_DUMP_THREADS | |
| 19 | C030-R5 board (STM32F437), Cat M1 | 25 | STM32F4 | STM32Cube | SARA_R5 NINA_W15 M8 | port device network sock ble wifi cell short_range security mqtt_client http_client ubx_protocol spartn gnss location | U_CFG_TEST_CELL_PWR_DISABLE U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=0x42 U_CFG_SARA_R5_M8_WORKAROUND U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_CFG_TEST_SECURITY_C2C_TE_SECRET=\x00\x01\x02\x03\x04\x05\x06\x07\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8 U_DEBUG_UTILS_DUMP_THREADS | ||
| 20 | WHRE board (NINA-W1), Cat M1 | 5 | ESP32 | ESP-IDF | SARA_R412M_02B | cell mqtt_client | U_CFG_APP_FILTER=cellMqtt.mqttClient.exampleMqtt.cellMuxMqtt.cellCfgGreeting.cellInfo U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS | ||
| 21 | WHRE board (NINA-W1), Cat M1 | 5 | ESP32 | ESP-IDF | SARA_R410M_02B | cell mqtt_client | U_CFG_APP_FILTER=cellMqtt.mqttClient.exampleMqtt.cellMuxMqtt.cellCfgGreeting.cellInfo U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS | ||
| 22 | NINA-W1 + EVK, Cat M1 | 20 | ESP32 | esp32:esp32:nina_w10 | Arduino | ESP-IDF | SARA_R422 M8 | port device network sock security cell mqtt_client http_client gnss location | U_CFG_TEST_CELL_PWR_DISABLE U_GNSS_TEST_DISABLE_ACTIVE_ANTENNA_DISABLE U_CFG_MONITOR_DTR_RTS_OFF U_CFG_1V8_SIM_WORKAROUND U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_CFG_APP_PIN_CELL_VINT=-1 U_CFG_APP_PIN_CELL_PWR_ON=5 U_CFG_APP_PIN_CELL_TXD=14 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS |
| 23 | Windows + EVK, Cat M1 | 30 | WIN32 | WINDOWS | MSVC | SARA_R5 M8 NINA_W15 | port device network sock ble wifi cell short_range security mqtt_client http_client ubx_protocol gnss spartn location | U_CFG_TEST_DISABLE_GREETING_CALLBACK U_CFG_MUTEX_DEBUG U_NETWORK_GNSS_CFG_CELL_USE_AT_ONLY U_GNSS_MSG_TEST_MESSAGE_RECEIVE_NON_BLOCKING_PRINT U_CFG_TEST_NET_STATUS_CELL=RF_SWITCH_A U_CFG_TEST_NET_STATUS_SHORT_RANGE=PWR_SWITCH_A U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=6009C390E4DAp U_CFG_TEST_UART_A=100 U_CFG_APP_SHORT_RANGE_UART=101 U_CFG_APP_CELL_UART=102 U_CFG_TEST_SECURITY_C2C_TE_SECRET=\x00\x01\x02\x03\x04\x05\x06\x07\xff\xfe\xfd\xfc\xfb\xfa\xf9\xf8 U_CFG_QUEUE_DEBUG | |
| 24 | Linux/Posix under Zephyr | 5 | LINUX32 | native_posix | Zephyr | port | U_CFG_MUTEX_DEBUG U_CFG_TEST_UART_A=0 U_CFG_TEST_UART_B=1 | ||
| 25 | HPG Solution board (NINA-W1), live network | 25 | ESP32 | ESP-IDF | LARA_R6 M9 | port device network sock cell security mqtt_client gnss location | U_CFG_TEST_DISABLE_MUX U_NETWORK_GNSS_CFG_CELL_USE_AT_ONLY U_HTTP_CLIENT_DISABLE_TEST U_CFG_MONITOR_DTR_RTS_OFF U_CELL_TEST_NO_INVALID_APN U_CELL_TEST_CFG_BANDMASK1=0x0000000000080084ULL U_CELL_NET_TEST_RAT=U_CELL_NET_RAT_LTE U_CELL_TEST_CFG_MNO_PROFILE=90 U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_CFG_APP_PIN_CELL_PWR_ON=0x800c U_CFG_APP_PIN_CELL_RESET=13 U_CELL_RESET_PIN_DRIVE_MODE=U_PORT_GPIO_DRIVE_MODE_NORMAL U_CFG_APP_PIN_CELL_VINT=0x8025 U_CFG_APP_PIN_CELL_DTR=15 U_CFG_APP_PIN_CELL_TXD=25 U_CFG_APP_PIN_CELL_RXD=26 U_CFG_APP_PIN_CELL_RTS=27 U_CFG_APP_PIN_CELL_CTS=36 U_CFG_APP_GNSS_I2C=0 U_GNSS_TEST_I2C_ADDRESS_EXTRA=0x43 U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS | ||
| 26 | NINA-B4 | 10 | NRF52833 | ubx_evkninab4_nrf52833 | Zephyr | M10 | port ubx_protocol gnss spartn | U_CFG_APP_GNSS_I2C=0 U_CFG_TEST_PIN_GNSS_RESET_N=30 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 | |
| 27 | ESP32S3-DevKitC | 10 | ESP32S3 | ESP-IDF | M9 | port ubx_protocol gnss spartn | U_CFG_APP_GNSS_I2C=0 U_CFG_TEST_PIN_GNSS_RESET_N=40 U_CFG_TEST_PIN_A=1 U_CFG_TEST_PIN_B=9 U_CFG_TEST_PIN_C=38 U_CFG_TEST_PIN_UART_A_CTS=11 U_CFG_TEST_PIN_UART_A_RTS=47 U_CFG_TEST_PIN_UART_A_RXD=10 U_CFG_TEST_PIN_UART_A_TXD=48 U_CFG_APP_PIN_GNSS_SDA=18 U_CFG_APP_PIN_GNSS_SCL=17 U_CFG_MUTEX_DEBUG U_DEBUG_UTILS_DUMP_THREADS |
Notes:
- the #defines listed are overrides on the default values that are defined in the code or additional to those defined in the code; they are not a complete list,
- the instances on which
at_clientis available to test use the same wiring as the other boards but allocate UARTs to pins differently: two UARTs are used for back-to-back testing, no flow control, and the CTS/RTS pins that are back-to-back connected forportUART testing are instead allocated to the second UART; on these instances theportUART test will be skipped, - the cellular tests take quite a long time to run and so where there are two SDKs on a single platform usually only one of them will run the cellular tests to keep the execution time down.
- When adding a new API make sure that it is present in at least one of the entries above, otherwise it may NOT be detected and tested at all on a branch that is NOT
master(where a smaller, focused set of tests are carried out).